Filter
Top Products
62
(e) Wiring method
● Do not put oil on the terminal and screw. Failure to do so may damage the screw.
● The number of the applicable solderless terminals must be two or less. When inserting two applicable solderless
terminals, insert them back-to-back. Otherwise the screw cannot be tightened and it may damage the screw.
● Tighten the terminal screw with an applicable screwdriver. Tightening with an inapplicable screwdriver may damage the
screw.
1. Loosen the terminal screw. Connect the round
solderless terminal as it is.
Self-tightening screw
is used
Round solderless
terminal