Filter
Top Products
73
CHAPTER 7 VARIOUS SETTINGS
7
7.2 Changing the Parameter
7.2.2 Changing the parameter without changing the network configuration
7.2.2 Changing the parameter without changing the network
configuration
To change only the created module parameter of the slave station without changing the network configuration, set the
parameter in the following procedure.
1. Display the "CC IE Field Configuration" window.
• When the master/local module is the QJ71GF11-T2
Project window [Parameter] [Network Parameter]
[Ethernet/CC IE/MELSECNET] button
• When the master/local module is the LJ71GF11-T2
Project window [Parameter] [Network Parameter] [Ethernet/CC IE Field]
button
2. Select the D/A converter module in "List of stations" on the "CC IE Field Configuration" window.
3. Open the "Parameter Processing of Slave Station" window.
[CC IE Field Configuration] [Online] [Parameter Processing of Slave Station]
4. Set "Parameter read" for "Method selection".
5. Click the button and the following window is displayed.
6. Click the button.
List of stations