Filter
Top Products
19
CHAPTER 2 PART NAMES
2
CHAPTER 2 PART NAMES
The section describes part names of the D/A converter module.
No. Name Application
1)
Station number setting
switch
A rotary switch for the following setting and test.
• Station Number Setting ( Page 45, Section 6.1)
• Offset/Gain Setting ( Page 69, Section 7.2)
• Unit Test ( Page 148, Section 11.5)
When operating the station number setting switch, use a slotted screwdriver with 3.5mm or less width of the
tip.
*1
3)
2)
4) 5) 6)
1) 7) 8)
*1 Do not remove this seal because it is used for a maintenance purpose.
*1
9)