Filter
Top Products
166
(5) Warning flag assignment (address: 0006
H
)
Warning flag (RX7) is assigned to the remote output (RY) of the extension output module using the external
signal assignment function. When a minor error occurs, the assigned remote output (RY) turns on.
(a) Setting range
The remote output (RY) number of the extension output module, counted from the start remote output (RY)
number (0000
H
) of the main module, is set.
Ex.
The following is an example for assigning Warning flag (RX7) to the remote output (RY) number, 6
H
, of
the extension output module.
The remote output (RY) number, 6
H
, is 26
H
when counted from the start remote output (RY) number of
the main module.
Thus, set 26
H
for Warning flag assignment (address: 0006
H
).
(b) Enabling the setting
Turn on and off Initial data setting request flag (RY9).
(c) Default value
The default value is set to No assignment (FFFF
H
).
If a value out of the setting range is set, an error occurs. The error code (0174
H
) is stored in Latest error code (RWr0), Error
flag (RXA) turns on, and the ERR. LED turns on. The operation is performed in the previous setting.
0H to to to1FH 20H 26H 2FH
to to0H 6H FH
Main module Extension module