Mitsubishi Electronics -NZ2GF2B-60DA4 Universal Remote User Manual


 
65
CHAPTER 7 VARIOUS SETTINGS
7
7.1 Parameter Setting
(2) Setting procedure
1. Display the "CC IE Field Configuration" window.
When the master/local module is the QJ71GF11-T2
Project window [Parameter] [Network Parameter] [Ethernet/CC IE/MELSECNET]
button
When the master/local module is the LJ71GF11-T2
Project window [Parameter] [Network Parameter] [Ethernet/CC IE Field]
button
2. Select the D/A converter module in "List of stations" on the "CC IE Field Configuration" window.
3. Open the "Parameter Processing of Slave Station" window.
[CC IE Field Configuration] [Online] [Parameter Processing of Slave Station]
4. Set "Parameter write" for "Method selection".
List of stations