Filter
Top Products
18
(10)Various installation methods
The module can be installed in six directions using a DIN rail.
(11)Easy module replacement
Because the 2-piece structure is adopted for the terminal block for module power supply and FG and terminal
block for analog output signals, the module can be replaced with the wire connected. In addition, because the
terminal block for analog output signals is the lift-up structure, the terminal block can be lifted only by loosening
the terminal block mounting screw to be removed easily.
(12)Error history confirmation
The history of 15 errors and occurrence time are stored in the D/A converter module.
The error history helps the investigation for the cause when a problem occurs.
(13)Easy setting with CC IE Field configuration of GX Works2
Programming is reduced since the parameter can be configured on the screen with the CC IE Field configuration
of GX Works2. In addition, setting status and operation status of modules can be checked easily.
Downward installation
DIN rail
Vertical installation Horizontal installation Horizontal installation
(upside down)
Upward installation