53
CHAPTER 6 INSTALLATION AND WIRING
6
6.4 Wiring with Terminal Block for Module Power Supply and FG
(4) Connecting and disconnecting the cable
To connect the cable, insert the wire with the cable fixing screw loosened and tighten the screw.
To disconnect the cable, pull out the wire with the cable fixing screw loosened with a slotted screwdriver.
(5) Processing method of the cable terminal
Strip the cable about 10mm from the top.
To use a bar solderless terminal, connect it to the stripped part.
(6) List of bar solderless terminals
The following table lists recommended bar solderless terminals.
Product name Model name Applicable wire size Contact
Bar solderless terminal
TE 0.5-10
0.5 mm
2
Nichifu Co., Ltd.
TE 0.75-10
0.75 mm
2
TE 1.0-10
0.9 to 1.0mm
2
TE 1.5-10
1.25 to 1.5 mm
2
Tool dedicated for bar
solderless terminal
NH79
Bar solderless terminal
AI 0.5-10WH
0.5 mm
2
Phoenix Contact Co., Ltd.
AI 0.75-10GY
0.75 mm
2
AI 1-10RD
1.0 mm
2
AI 1.5-10BK
1.5 mm
2
Tool dedicated for bar
solderless terminal
CRIMPFOX6
Cable
Around 10mm