Filter
Top Products
80
8.3 D/A Conversion Enable/Disable Function
Sets whether to enable or disable D/A conversion for each channel.
Disabling the D/A conversion for unused channels reduces the conversion cycles.
(1) Setting procedure
1. Set "Parameter write" for "Method selection".
"CC IE Field Configuration" window Select a D/A converter module in "List of stations".
[CC IE Field Configuration] [Online] [Parameter Processing of Slave Station]
2. Set "CH D/A conversion enable/disable setting" to "0: Enable".
8.4 D/A Output Enable/Disable Function
Whether to output the D/A conversion value or the offset value can be set for each channel.
The conversion speed is constant, regardless of the output enable/disable status.
(1) Setting procedure
Use CH Output enable/disable flag (RY10 to RY13) for the setting.
CH Output enable/disable flag (RY10 to RY13) Analog output
Output enable (ON) The D/A conversion value is output.
Output disable (OFF) The offset value is output.