Filter
Top Products
162
Appendix 3 Details of Remote Buffer Memory Areas
This section describes the details of remote buffer memory areas of the D/A converter module.
(1) Mode switch (address: 0000
H
)
Set the mode for all channels.
When a value other than the above is set, the error code (0730
H
) is stored in Latest error code (RWr0), Error flag
(RXA) and the ERR. LED turns on, and Automatical judgment mode (9
H
) is set to Mode switch (address: 0000
H
).
(a) Enabling the setting
1. Turn on and off Initial data setting request flag (RY9).
2. Check that "0920
H
" is stored in Latest warning code (RWr1).
3. Turn off and on the power supply.
(b) Default value
The default value is Automatical judgment mode (9
H
).
Mode Setting value
Normal mode
0
H
Trigger output mode
1
H
Automatical judgment mode
9
H