Mitsubishi Electronics -NZ2GF2B-60DA4 Universal Remote User Manual


 
16
1.2 Features
(1) Available flexible system configuration
Adopting the connection block type enables the combination of the main module and extension module.
Because various extension modules can be connected, a flexible configuration can be achieved.
In addition a poor contact of the extension module can be found promptly because the main module always
monitors the connection status of the extension module.
(2) Easy station number setting
Because of the rotary switch on the front of the module, setting and checking the station number are easy.
(3) Response improvement by high-speed conversion
The high-speed conversion of 100µs/channel is achieved.
(4) Reliability by high accuracy
High accuracy is achieved for the maximum value of analog output value: ±0.2% (ambient temperature: 25 ±5°C)
and ±0.3% (ambient temperature: 0 to 55°C).
(5) D/A conversion available at any timing
This function converts a digital value just after input of a trigger output request to an analog value for each
channel.
Combining this function with the external signal assignment function enables the direct input of Trigger output
request from the extension input module, thus the following advantages are provided.
The analog output can be always executed at a constant timing without influence from the sequence scan or
link scan. The reliability can be improved.
The analog output can be executed without a program, thus the cost in creating a program can be saved.
(6) Switching scale available
The D/A conversion value to be converted can be scale-converted to any range.
The scale-conversion can be performed without a program according to the digital value to be input, thus the cost
can be saved.
The flexible combination is possible.
Extension output module (sink type)
Extension output module (source type)
Extension input module
Various extension modules can be
connected according to the application.
Connecting the extension module to
wires or Ethernet cables is not required.
Extension moduleMain module
D/A converter module