Filter
Top Products
30
Do not use any "Use prohibited" remote I/O signals. If any of the signals are used, correct operation of the module cannot be
guaranteed.
(1) Remote I/O signal of the extension module
The remote I/O signal differs depending on the model of the extension module.
• Extension I/O module
Refer to the following.
CC-Link IE Field Network Remote I/O Module User's Manual
Main
module
RX10 Use prohibited RY10 CH1 Output enable/disable flag
RX11 Use prohibited RY11 CH2 Output enable/disable flag
RX12 Use prohibited RY12 CH3 Output enable/disable flag
RX13 Use prohibited RY13 CH4 Output enable/disable flag
RX14 Use prohibited RY14 Use prohibited
RX15 Use prohibited RY15 Use prohibited
RX16 Use prohibited RY16 Use prohibited
RX17 Use prohibited RY17 Use prohibited
RX18 Use prohibited RY18 Use prohibited
RX19 Trigger output completed flag RY19 Trigger output request
RX1A Use prohibited RY1A Trigger output completed clear request
RX1B Use prohibited RY1B Use prohibited
RX1C Use prohibited RY1C Use prohibited
RX1D Use prohibited RY1D Use prohibited
RX1E Alert output signal RY1E Alert output clear request flag
RX1F
External power supply monitor state flag (for
extension output module)
RY1F
External power supply monitor request flag (for
extension output module)
Extension
module 1
RX20
to
RX2F
Remote input (RX) of the connected extension
module is assigned.
RY20
to
RY2F
Remote output (RY) of the connected extension
module is assigned.
Module
type
Remote input
signal direction: D/A converter module
Master/local module
Remote output
signal direction: Master/local module
D/A converter module
Device
number
Description
Device
number
Description