Filter
Top Products
6
INTRODUCTION
Thank you for purchasing the CC-Link IE Field Network digital-analog converter module (hereafter abbreviated as D/A
converter module).
This manual describes the operating procedure, system configuration, parameter settings, functions, and
troubleshooting of the D/A converter module.
Before using this product, please read this manual and the relevant manuals carefully and develop familiarity with the
functions and performance of the D/A converter module to handle the product correctly.
When applying the program examples introduced in this manual to an actual system, ensure the applicability and
confirm that it will not cause system control problems.
Target module: NZ2GF2B-60DA4
Remark
Unless otherwise specified, this manual describes the program examples in which the remote I/O signals and remote
registers are assigned for a D/A converter module as follows.
• Remote input signal: RX0 to RX1F
• Remote output signal: RY0 to RY1F
• Remote register: RWr0 to RWrF, RWw0 to RWwF
For the assignment of remote I/O signals and remote registers, refer to the following.
User's manual for the master/local module used