Filter
Top Products
I
-
I
-
Using Spectrum Analyzer Features
Saving and Recalling Data from Analyzer Memory
To
Save
a
Trace
Saving trace data is very similar to saving state data. Saving trace data saves
both the trace data and the state data.
1. Enter a screen title, if desired, by using
@iKF7)
and Change Title
2. Set up the trace to be stored.
3. Press
(SAVE_).
If CARD is underlined, press INTERNAL CARD to select
INTERNAL.
4. Press Trace
+
Intml
This accesses a menu displaying TRACE A ,
TRACE B , and TRACE C .
5.
Press the softkey for the trace that you want to save: TRACE A ,
TRACE B , or TRACE C . REGISTER
#
and MAX REG
#
= are displayed on
the cable TV analyzer display. The number after MAX REG
#
= indicates the
maximum register number that can be entered for trace storage in cable
TV analyzer memory.
6. Use the numeric keypad to enter a number from 0 to the maximum
register number and then press @FKi?J
3-10