Filter
Top Products
I
-
I
-
Spectrum Analyzer Mode Key Descriptions
Spectrum Analyzer Mode Functions
accesses softkey menus that allow you to store state data,
trace data, limit-line tables, and amplitude-correction factors
on a memory card or in analyzer memory. The SAVE
function also allows you to save state data, trace data,
limit-line tables, amplitude-correction factors, and program
data on the memory card. In addition, pressing
m
accesses the softkey menus used to catalog the saved data in
analyzer memory or on the memory card.
To save to, or catalog from, analyzer memory press
INTERNAL CARD so that INTERNAL is underlined.
To save to, or catalog from, the memory card, press
INTERNAL CARD so that CARD is underlined.
Saving state data saves the analyzer settings, but not the
trace data. Saving trace data saves both the trace data and
the state data. Display images and programs (also called
downloadable programs or
DLPs),
can only be saved to or
recalled from the memory card.
States and traces are saved in analyzer memory even if
the instrument is turned off or (PRESET_) is pressed. Eight
analyzer-memory state registers and many trace registers are
available for the user. The Catalog Internal softkey is
used to access the catalog functions. It also accesses the DLP
editor utility.
6-124
-