Filter
Top Products
I
-
I
-
Getting Started
Memory Card Insertion and Battery Replacement
pul2lc
Figure 2-8. Memory Card Battery Date Code location
Procedure to Change the
The battery is located beside the card’s write-protect switch on the end
Memory Card Battery opposite the connector.
CAUTION
The battery power enables the memory card’s memory to retain data. You
can lose the data when the battery is removed. Replace the battery while the
card is installed in a powered-up instrument.
1. Locate the groove along the edge of the battery clip. See Figure 2-9.
2. Gently pry the battery clip out of the card. The battery fits within this
clip.
3. Replace the battery, making sure the plus
(+)
sign on the battery is on the
same side as the plus
(+)
sign on the clip.
4. Insert the battery clip into the memory card, holding the clip as oriented
in Figure 2-9. (Face the “open” edge of the clip toward the write-protect
switch on the memory card.)
5. Write the date that the battery was replaced on the memory card label.
This will help you to remember when the battery should be replaced.
2-29