Filter
Top Products
I
-
I
-
Using Spectrum Analyzer Features
Using
Limit4ine
Functions
Completing Table Entry
Pressing EDIT DONE blanks the limit-line table from the screen and accesses
and Activating Limit-Line
Testing
the menu with LMT TEST ON OFF and LMT DISP Y N AUTO softkeys.
Pressing LMT TEST ON OFF turns the limit-line testing on and off.
Pressing LMT DISP Y N AUTO (Y) turns the limit lines display on. Pressing
LMT
DISP Y N AUTO (N) turns the limit lines display off. Pressing
LMT DISP Y N AUTO (AUTO) sets the limit line display to match the limit
line test function. With AUTO underlined the limit lines are only displayed
when limit line testing is turned on.
Saving or Recalling
Limit-Line Tables
Pressing
c-1
then Limit Lines accesses SAVE LIMIT and
RECALL LIMIT . These softkey functions provide an easy way to save or
recall current limit-line tables. SAVE LIMIT saves the current limit-line
tables in the current mass storage device (either cable TV analyzer memory
or a memory card). To determine the current mass storage device, press
SAVE LIMIT . If MAX REG
#
appears on the cable TV analyzer display, the
current mass storage device is analyzer memory. If PREFIX= is displayed,
the memory card is the mass storage device. Enter a register number, then
press
(ENTER]
to save the current limit-line table in the current mass storage
location.
RECALL LIMIT recalls limit-line tables from the current mass storage device
(either cable TV
analyzer memory or a memory card). To determine the
current mass storage device, press RECALL LIMIT If MAX REG
#
appears on
the cable TV analyzer display, the current mass storage device is analyzer
memory. If PREFIX= is displayed, the memory card is the mass storage
device. To recall a limit line, enter the register number that the limit-line
table was saved under, then press
[ENTER].
When recalling a limit line from
the memory card, it is necessary that the current prefix matches the prefix
that the limit line was stored with. Use Change Prefix to change the
current prelix.
3-48