Filter
Top Products
I
-
I
-
Spectrum Analyzer Mode Key Descriptions
Spectrum Analyzer Mode Functions
CATALOG
AMP
COR
catalogs the amplitude correction factor tiles that are on
the memory card. Use the CATALOG REGISTER softkey
to catalog amplitude factors saved in analyzer memory
(amplitude correction factors saved in analyzer memory
are stored in trace registers). Amplitude correction factors
are saved with an “a” before the memory card
lile
name.
Amplitude factors can be saved in analyzer memory by
either loading in amplitude correction factors from a
memory card, detining amplitude correction factors using
a remote programming command (AMPCOR), or using
EDIT AMP
COR
See “Entering Amplitude Correction
Factors” in Chapter 3 for more information.
Front-Panel Key Access
(RECALL]
or
m
Cat
alog
Card
accesses a menu with the cataloging functions for the
memory card: CATALOG ALL , CATALOG STATES ,
CATALDG
TRACES, CATALOG PREFIX, CATALOG DLP,
CATALOG AMP COR, CATALOG LMT
LIME,and
CATALOG DISPLAY . Each catalog function displays catalog
information and accesses a menu containing LOAD FILE
and DELETE FILE . The catalog contains information about
the items stored on the memory card. (See Figure
6-l
and
Table
6-2.)
Use the step keys to view different sections of the directory,
and the knob to select a
file.
Press LOAD FILE to load the
selected file into analyzer memory. Press DELETE FILE to
delete the selected file from the memory card.
Unlike saving to the internal memory, data is saved as a file
on the memory card. The hles stored on the memory card
are in the logical interchange format (LIF).
6-26