Filter
Top Products
I
-
I
-
Spectrum Analyzer Mode Key Descriptions
Spectrum Analyzer Mode Functions
Cable
TV Analyzer Programmer’s Guide and Chapter 1 of
this manual.
If you want the softkey labels to be printed with the
analyzer display printout when using
[Copy),
press
PRT MENU ON OFF so that ON is underlined.
Press
[ml
and the process will begin. The screen remains
frozen (no further sweeps taken) until the data transfer to
the printer is complete. The analyzer works with many
Hewlett-Packard and Epson compatible printers.
The plotting process is similar to the printing process.
On the analyzer, press
C-1,
Plot Conf ig Use
BAUD RATE to change the baud rate of the analyzer, if
necessary. For Option 021, use PLOTTER ADDRESS to
change the HP-IB address for the plotter, if necessary.
With
PLTS/PG
1 2 4 , you can choose a full-page,
half-page, or quarter-page plot. Press
PLTS/PG
1 2 4 to
underline the number of plots per page desired. If two
or four plots per page are chosen, a softkey function is
displayed that allows you to select the location of the plotter
output on the paper. If two plots per page are selected,
PLT
*
mc
*
-
is displayed. If four plots per page are
selected, PLT
_
-LOG
_
_
is displayed. Press the softkey
until the rectangular marker is in the desired section of the
softkey label. The upper and lower sections of the softkey
label graphically represent the position of the page where
the plotter output will be located.
6-46