Filter
Top Products
I
-
I
-
Spectrum Analyzer Mode Key Descriptions
Spectrum Analyzer Mode Functions
CATALOG
REGISTER
displays the status of state and trace registers in analyzer
memory. States 1 through 8 are displayed with the center
frequency (denoted by CF) and span (denoted by SP). The
status of trace registers 0 to the maximum number of traces
is displayed also. lf a trace, limit-line tables, or amplitude
correction factors have been saved in the trace register,
the screen title (denoted by “TL:“) is displayed, otherwise
UNUSED is displayed. If the screen title length allows, or
if no title is saved with the trace, the time and date are
displayed. To load the contents of the state or trace register
into analyzer memory, use the knob or step keys to select
the register and press LOAD FILE The DELETE FILE key
can be used to delete a state or trace register from analyzer
memory.
NOTE
Do
not use LOAD FILE to load the contents of a trace register containing limit-line tables or
amplitude correction factors.
CATALOG
STATES
CATALOG
TRACES
Front-Panel Key Access
[mj
or
(SAVE_)
catalogs all of the states stored on the memory card.
Front-Panel Key Access
[RECALL)
or
ISAVE_)
catalogs all of the traces stored on the memory card.
Front-Panel Key Access
[m]
or
(SAVE_]
6-34