Filter
Top Products
I
-
I
-
Options and Accessories
Options
Narrow
Resolution
Bandwidths
(Option
130)
This option provides additional narrow resolution bandwidths of 30 Hz, 100
Hz, and 300 Hz. These bandwidths improve the cable TV analyzer sensitivity
and allow you to resolve closely spaced signals.
Option 130 is also available as a retrofit kit (Option
R30)
after the purchase of
your cable TV analyzer, or as a kit HP part number
5063-0246.
CAUTION
Ventilation Requirements: When installing the instrument in a cabinet,
the convection into and out of the instrument must not be restricted. The
ambient temperature (outside the cabinet) must be less than the maximum
operating temperature of the instrument by 4
“C
for every 100 watts
dissipated in the cabinet. If the total power dissipated in the cabinet is
greater than 800 watts, then forced convection must be used.
Rack
Mount
Kit
without
Handles
(Option
908)
This option provides the parts necessary to mount the cable TV analyzer in
an HP System II cabinet or in a standard 19 inch (482.6 mm) equipment rack.
Option 908 is also available as a kit (HP part number 5062-4841).
CAUTION
Ventilation Requirements: When installing the instrument in a cabinet,
the convection into and out of the instrument must not be restricted. The
ambient temperature (outside the cabinet) must be less than the maximum
operating temperature of the instrument by 4
“C
for every 100 watts
dissipated in the cabinet. If the total power dissipated in the cabinet is
greater than 800 watts, then forced convection must be used.
9-5