Filter
Top Products
I
-
I
-
Preparing For Use
Printing or Plotting
4. Press
(CONFIG].
5.
Press COPY DEV PRNT PLT so that PLT is underlined.
6.
Press
(CONFIG),
Plot Conf kg . You can choose a full-page, half-page,
or quarter-page plot with the
PLTS/PG
1 2 4
softkey.
Press
PLTS/PG
1 2 4 to underline the number of plots per page desired.
7. If two or four plots per page are chosen, a function is displayed that allows
you to select the location on the paper of the plotter output. If two plots
PLT
11
per page are selected, then the LOC
_
_
function is displayed. If four
PLT
Cl
_
plots per page are selected, then the LOC
_
_
is displayed. Press the
softkey until the rectangular marker is in the desired section of softkey
label. The upper and lower sections of the softkey label graphically
represent where the plotter output will be located.
8. Press PLT->L JT ON OFF so that ON is underlined.
9. Then press
[s).
Printing
after
Plotting
or
Plotting
after
Printing
Pressing IcoPv] without changing COPY DEV PRNT PLT produces the
function last entered (a print or a plot).
l To print after doing a plot, press
Cm],
COPY DEV PRMT PLT (so that
PRNT is underlined), then
[Copy).
l To plot after printing, press
I-1,
COPY DEV PRNT PLT (so that PLT is
underlined), and (copy).
l-38