Filter
Top Products
I
-
I
-
If You Have a Problem
Error Messages
INVALID CARD: DIRECTORY
Indicates the memory card has not been formatted. (U)
INVALID CARD: NO CARD
Indicates a memory card has not been inserted. (LJ)
INVALID CARD: TYPE
Indicates one of the following conditions: a card reader is not installed, the
memory card is write-protected (check the position of the switch on the
memory card), the memory card is a read-only memory (ROM) card, or a
memory card has not been inserted.
INVALID CHECKSUM: USTATE
The user-defined state does not follow the expected format. (U)
INVALID COMPARE OPERATOR
An IF/THEN or REPEAT/UNTIL routine is improperly constructed.
Specifically, the IF or UNTIL operands are incorrect. (U)
INVALID DET: FM or TV option only
Indicates that the selected detector cannot be used until the appropriate
option is installed in the cable TV analyzer. (U)
INVALID ENTER FORMAT
The enter format is not valid. See the appropriate programming command
description to determine the correct format.
(U)
INVALID <file name> NOT FOUND
Indicates that the specified
Iile
could not be loaded into cable TV analyzer
memory or purged from memory because the file name cannot be found.
w>
INVALID FILENAME
_
_
_
Indicates the specified
file
name is invalid. A file name is invalid if
there is no
lile
name specified, if the first letter of the file name is not
alphabetic, or if the specified file type does not match the type of
hle.
See the description SAVRCLW or STOR programming command for more
information. (U)
8-20