Filter
Top Products
I
-
GHI JKL
Spectrum Analyzer Mode Key Descriptions
Spectrum Analyzer Mode Functions
Some analyzer functions are altered or are not available
when the gate utility is active. See Table 6-7. From
within the gate utility press EXIT UTILITY to return
to normal analyzer operation. Press
CSWEEP]
twice, and
EXIT UTILITY to return to the gate utility and then exit it
properly.
Table 6-7.
Commands
AlteredlNot
Available within the Gate Utility
Command
Description of Change
% AM
measurement function is not available
Adjacent Channel Power measurement function is not available
Calibration
no calibration functions can be accessed
Channel Power
measurement function is not available
FFr
measurement function is not available
N
dB
Points
measurement function is not available
Occupied Bandwidth
measurement function is not available
Peak Zoom
routine is not available
Res
BW
turns off resolution BW coupling to pulse width
Span
must be zero in the time domain window
Sweep time
turns off sweep time coupling to
PRI
TOI
measurement function is not available
Video BW
turns off video BW coupling to gate length
Front-Panel Key Access
[SWEEP)
accesses the softkey menu used for selecting screen title or
prefix characters G through L.
Front-Panel Key Access (CAL),
I-),
(-1,
(jj),
or
m
6-79