Filter
Top Products
I
-
I
-
Using Spectrum Analyzer Features
Saving and Recalling Data from the Memory Card
To
Save
a
Trace
Saving trace data saves the trace data and the state data.
1.
Press
(jj]
or
CCONFIGI),
and then Change Prefix to enter a new
preEx or change the existing
preEx.
If you do not specify a
preEx,
the trace will be saved with a Ele name
consisting of s-(register number).
2.
Enter a screen title, if desired, by using
@iFiF]
then Change Title
3. Set up the trace to be stored.
4.
Press (SAVE). If INTERNAL is underlined, press INTERNAL CARD to select
CARD. Press Trace
-+
Card
to access the menu that displays TRACE A ,
TRACE
B
, and TRACE C .
5.
Press the softkey label of the trace that you want to save: TRACE A ,
TRACE 3 , or TRACE C . REGISTER
#
and PREFIX= are displayed on the
cable TV analyzer display.
6. Use the numeric keypad to enter a register number and then press
(ENTER).
The trace data is saved with a file name consisting of a “t,
))
the current
preEx,
an underscore (-), and the register number. The “t” denotes that
the
file
contains trace data.
3-22
-1