Filter
Top Products
I
-
I
-
Using Spectrum Analyzer Features
Saving and Recalling Data from Analyzer Memory
To
Recall
Limit-Line
lkbles
or
Amplitude
Correction
Factors
1. Press
[RECALL].
If
CARD is underlined, press INTERNAL CARD to select
INTERNAL.
2. Press Internal
+
Trace . This accesses a menu with LIMIT LINES
and AMP
COR
3.
Press either LIMIT LINES to recall a limit-line table or, AMP COR to
recall amplitude-correction factors.
4. Enter the register number under which the data was stored.
5. Press
[ENTER].
To
Protect
Data
From
Being
Overwritten
If you want to protect all state, trace, limit line, and amplitude correction data
from being overwritten, press
m,
then SAV LOCK ON OFF so that ON
is underlined.
lkble
3-l
summarizes the functions when saving and recalling
data to and from cable TV analyzer memory.
NOTE
This feature does not protect state, trace, limit line, and amplitude correction data from
[ERASE MEM ALL].
3-13