Filter
Top Products
I
-
If You Have a Problem
Before You Call Hewlett-Packard
If
you
suspect
the
analyzer
configuration
is
wrong
Reset the cable TV analyzer configuration to the state it was in when it was
originally shipped from the factory using DEFAULT
CONFIG
. Press the
following keys:
@5GiE) More
I
of 3
DEFAULT
CONFIG
DEFAULT
CONFIG
Note that DEFAULT
CONFIG
requires a double key press. See the softkey
description for DEFAULT
CONFIG
in Chapter 6.
If
the
display
position
is
offset
Perform the following procedure to adjust the vertical and horizontal position
of the display.
1. Press the following keys to adjust the vertical position:
ICALl
More
1
af
4
CRT
W&T
POSITION
2. Use the knob or step keys to adjust the vertical position.
3. Press the following keys to adjust the horizontal position:
(CAL) More 1 of 4
CRT
HORZ
POSITION
4. Use the knob or step keys to adjust the horizontal position,
5.
Press (CAL], CAL STORE to save the new vertical and horizontal display
position.
8-6