Filter
Top Products
I
-
If You Have a Problem
Error Messages
INVALID FILE: NO ROOM
Indicates that there is insufficient space available on the memory card to
store the data. (U)
INVALID HP-IB ADRS/OPERATION
An HP-IB operation was aborted due to an incorrect address or invalid
operation. Check that there is only one controller (the cable TV analyzer)
connected to the printer or plotter, (U)
INVALID HP-IB OPERATION REN TRUE
The HP-IB operation is not allowed. (This is usually caused by trying
to print or plot when a controller is on the interface bus with the cable
TV analyzer.) To use the cable TV analyzer print or plot functions, you
must disconnect any other controllers on the HP-IB. If you are using
programming commands to print or plot, you can use an HP BASIC
command instead of disconnecting the controller. See the HP 8590 E-Series
and L-Series
Spectrum
Analyzers and HP 8591C
Cable
TV Analyzer
Programmer’s Guide for more information. (U)
INVALID ITEM:-
-
-
Indicates an invalid parameter has been used in a programming command.
m
INVALID KEYLBL:
-
-
-
Indicates that the specified key label contains too many characters. A key
label is limited to 8 printable characters per label line. (U)
INVALID KEYNAME:-
-
-
The specified key name is not allowed. (The key name may have conflicted
with a cable TV analyzer programming command.) To avoid this problem,
use an underscore as the second character in the key name, or avoid
beginning the key name with the following pairs of letters: LB, OA, OL,
TA, TB, TR, MA, MF, TS, OT, and DR. (U)
INVALID OUTPUT FORMAT
The output format is not valid. See the appropriate programming command
description to determine the correct format. (U)
INVALID RANGE: Stop < Start
Indicates that the first trace element specified for a range of trace elements
is larger that ending trace element. When specifying a trace range the
starting element must be less than the ending element. For example,
TRA[2,300]
is legal but
TRA[300,2]
is not. (U)
8-21