Filter
Top Products
I
-
Spectrum Analyzer Made Key Descriptions
Spectrum Analyzer Mode Functions
Pressing Change Title accesses the softkey menus
that contain the available characters and symbols. A
programming command can be entered in the screen title
area. It can then be executed from the front panel by
pressing
EXECUTE
TITLE
The screen title will remain on the screen until either
Change Title is pressed again or a trace is recalled
that was saved with a screen title. A screen title can also
be cleared by using the clear function. Press
cm),
Change Title , YZ,# Spc Clear , Clear to clear the
current screen title.
Pressing Change Title accesses a menu containing the
letters of the alphabet, the underscore symbol (-), the
number symbol
(#),
a space, and the Clear
softkey.
To
select a character, press the softkey that displays the group
of characters that contains the desired character. The
softkey menu changes to allow you to select an individual
character. If you make a mistake, press
[BK)
to space
back over the incorrect character. Additional characters
are available by pressing More
I
of 2 . Numbers may be
selected by using the numeric keypad.
Pressing
KPG
TITLE provides additional characters for
the menu accessed by pressing Change Title . Pressing
RPG
TITLE provides lowercase letters, numbers, Greek
letters, and punctuation symbols.
To
access additional
characters, press
RPG
TITLE When
RPG
TITLE is
pressed, a character table appears on the screen. To select
a character, turn the knob to position the cursor under the
desired character and press the
(ENTER)
key. The step keys
move the cursor between rows. When all desired characters
have been entered, press WINDOWS [EXT]. All other
analyzer functions are inoperative until the
[NEXT)
or
IHOLD)
key is pressed.
Front-Panel Key Access
a
or
(j-1
6-37