Filter
Top Products
I
-
I
-
Spectrum Analyzer Mode Key Descriptions
Spectrum Analyzer Mode Functions
SET
DATE
SET
TIME
allows you to set the date of the real-time clock. Enter the
date in the YYMMDD format using the number keypad and
press
[ENTER].
Valid year (YY) values are 00 through 99.
Valid month (MM) values are from 01 to 12, and valid day
values are from 01 to 31.
Front-Panel Key Access
(-1
allows you to set the time of the realtime clock. Enter the
time in 24 hour, HHMMSS format, using the number keypad
and pressing (ENTER]. Valid hour
(HH)
values are from 00 to
23. Valid minute (MM) and second (SS) values are from 00 to
59.
Front-Panel Key Access
[WI
Setup
accesses the menu used to set up parameters specific to the
power measurements.
If another front- key is pressed, exiting the power menus,
press the
I-1
key twice to return to the last power
menu that was being used.
Front-Panel Key Access
C-1
changes the sweep control to single sweep if the analyzer is
in the continuous sweep mode. It executes a sweep after the
trigger condition is met.
6-132