Filter
Top Products
I
-
I
-
Spectrum Analyzer Mode Key Descriptions
Spectrum Analyzer Mode Functions
DISPLAY
--f
CARD
saves the current analyzer display image on the memory
card for viewing or copying later. It does not save the
analyzer state or trace, so it cannot be used to restore an
instrument to the conditions at the time the image was
saved.
To save the current display image, press
DISPLAY
+
CARD , use the numeric keypad to enter a
number, and press (ENTER). If you want the
Ille
name of the
stored data to contain a prefix, press Change Prefix to
enter a prefix before storing the data. If the display image
was stored using a prefix, the file name for the display
image consists of i(preEx)-(register number). If no prefix
was specified, the
lile
name is i-(register number).
Front-Panel Key Access
m
DISPLAY
CNTL I
displays the status of the auxiliary connector input (control
line I) on the analyzer screen (high = 1 or low = 0, in TTL).
Front-Panel Key Access
[=CTRLI)
Dispose
User Mem
accesses the
softkeys
ERASE MEM CARD , ERASE DLP MEM ,
ERASE
STATEALL
, ERASE
TRACEALL
, and
ERASE MEM ALL which are used to erase the user programs
and variables that are in analyzer memory.
NOTE
Use DELETE FILE to selectively delete stored programs or variables from analyzer memory
Front-Panel Key Access
fj%i%%$
6-56