Filter
Top Products
I
-
I
-
Using Spectrum Analyzer Features
learn About the Windows Display
6. Press WINDOWS
~Z%i).
Now a full-sized display of the lower window
will be displayed. Notice the increase in the displayed annotation.
7. Pressing WINDOWS [NEXT) activates the upper window. A full- sized
display of it will be shown, and the inactive lower window will not be
displayed. Press WINDOWS
IIUEXT)
again to activate the lower window
and display it again. Notice that the zone markers can be used to tell
which window is active and being displayed while in the zoom state.
8. Press WINDOWS
cm)
to return to the dual windows display. The
lower window will still be active.
9. Press WINDOWS OFF and the cable TV analyzer returns to normal
operation with the active window as the cable TV analyzer state.
10. Pressing WINDOWS
a
at this point turns the windows display format
on again with the current display as the new upper window. A new
lower window will be generated based on the zone in the upper window.
NOTE
Markers and limit lines can be used in both windows, but they must be turned on independently in
each windovu The current limit lines will be common to both windows.
3-56