Filter
Top Products
I
-
Spectrum Analyzer Mode Key Descriptions
Spectrum Analyzer Mode Functions
Change
Prefix
allows you to enter a prefix that can be used for saving
and recalling data to and from the memory card, and for
cataloging by the prefix. The prefix can be from one to
seven characters long. The longer the prefix, the shorter
the register number must be. The total length of the prefix
and register number cannot exceed eight characters. The
prefix can be any character; however, the underscore
should not be the Erst character of the
prefix.
Pressing
Change Prefix accesses a menu containing the letters of
the alphabet, the underscore symbol (-), the number symbol
(#>,
a space, and the clear function. To select a character,
press the softkey that displays the group of characters that
contains the desired character. The softkey menu changes
to allow you to select an individual character. If you make
a mistake, press
cm]
to space back over the incorrect
character. Additional characters are available by pressing
More 1 of 2 . Numbers may be selected with the numeric
keypad.
A prefix can be cleared with the clear function. Press
[m]or(jjJ
Change Prefix, YZ,# Spc Clear,
Clear to clear the current prefix. The current prefix is
blanked by pressing DEFAULT COMFIG
Front-Panel Key Access
[CONFIGI),
(j-J,
Ijj],
or
m
Change
Title
allows you to write a
53character
screen title across the
top of the screen. The marker readout may interfere with
the last 26 characters. The markers can be turned off by
pressing
(MKR),
More
I
of 2 , and MARKER ALL OFF .
6-36