Filter
Top Products
I
-
Spectrum Analyzer Mode Key Descriptions
Spectrum Analyzer Mode Functions
recalls into analyzer memory a trace saved on the memory
card. Limit lines and amplitude correction factors are
recalled by pressing Card
+
Trace, LIMIT LINES or
AMP
COR
If the screen title does not exceed 34 characters,
the time and date when the trace data was stored is also
displayed with the recalled trace data. The screen title
and date are not recalled with limit-line hles or amplitude
correction factor files. Before recalling a trace, limit-line file,
or amplitude correction factors file that was saved under a
prefix other than the current prefix, change the current
prefix to the prefix used when the data was saved. If
windows are being used, only the trace of the active window
can be recalled.
Pressing LOAD FILE is an alternate way to load trace
data (but not recommended for recalling limit-line files or
amplitude correction factor
flies)
from the memory card into
analyzer memory. See “Saving and Recalling Data from the
Memory Card” in Chapter 3 for more information.
Front-Panel Key Access
[ml
catalogs all the programs and variables stored in analyzer
memory in bytes along with the remaining memory available
in bytes. Press CATALOG REGISTER to catalog states,
traces, limit-line tables, and amplitude correction factors
saved in analyzer memory.
Pressing CATALOG ALL catalogs all traces, states, amplitude
correction factors, programs, display images, and limit-line
tables stored on the memory card when cataloging the
memory card.
Front-Panel Key Access
[RECALL]
or (SAVE_)
6-25