Filter
Top Products
Model 9110T NOx Analyzer Communications Setup and Operation
Teledyne Analytical Instruments 146
6.5.2.1. Changing the Analyzer’s HOSTNAME
The HOSTNAME is the name by which the analyzer appears on your network. The initial default
Hostname is blank. To assign or change this name (particularly if you have more than one 9110T
analyzer on your network, where each must have a different Hostname), enter the
SETUP>COMM>INET men and scroll to the HOSTNAME menu as in Figure 6-5; make the changes as
shown in Figure 6-6:
Figure 6-6. COMM – Change Hostname