Filter
Top Products
Model 9110TH NOx Analyzer Specific Configuration
Teledyne Analytical Instruments iii
INFORMATION ABOUT THE SPECIFIC CONFIGURATION OF YOUR
MODEL 9110T NOX ANALYZER
Note: All instruments must include the standard hardcopy manual.
SELECTED VERSIONS OF THE MODEL 9110T
Model 9110T— Standard Touch Screen Version
This Model 9110E NO
x
Analyzer is a touch screen version designed for analyzing the NOx
concentration in a background gas specified by the customer. It has a minimum settable range of 0-50
ppb and a maximum settable range of 0-10 ppm. The standard version is designed for ambient pressure
applications. The analyzer may have one or two analysis ranges with or without auto-ranging as listed
below. It includes an internal Moly converter and an external pump. Alarm relays are optional and if
included, that option will be checked below.
Model 9110TH — High Range Touch Screen Version
The Model 9110EH NO
x
Analyzer is a touch screen version designed for analyzing higher NO
x
concentration (from 0-5 ppm to 0-5000 ppm) than the standard model. It includes an internal Hicon
converter and an external pump. Alarm relays are optional and if included, that option will be checked
below. There is no internal zero/span gas/oven option available for this model. The analyzer may have
one or two analysis ranges with or without autoranging as listed below.
This version is available with internal or external Hicon or Moly converters.
Model 9110TM — Mid-Range Touch Screen Version
The Model 9110EA NO
x
Analyzer is a touch screen version designed for analyzing a mid-range NO
x
concentration. It has a minimum settable range of 0-1 ppm and a maximum settable range of 0-200 ppm.
t includes an internal Moly converter and an external pump. Alarm relays are optional and if included,
that option will be checked below. There is no internal zero/span gas/oven option available for this
model. The analyzer may have one or two analysis ranges with or without autoranging as listed below.
This model is similar to the EH version but does not have a sample bypass line. An optional
paramagnetic oxygen sensor is available for oxygen analysis in this version.
Converter Options
The 9110 is equipped with an internal Hicon thermal converter as standard equipment. Other
converters are available for the EH version as follows:
Internal Hicon (standard) External Hicon (2
nd
set of rack mounts req’d)
Internal Moly External Moly (2
nd
set of rack mounts req’d)