Filter
Top Products
Model 9110T NOx Analyzer Principles of Operation
Teledyne Analytical Instruments 360
13.7.1.1. AC Configuration – Internal Pump (JP7)
If your 9110T includes an internal pump the following table, jumper set JP7 is used to configure the
power supplied to it as shown in Figure 13-27.
Table 13-6: AC Power Configuration for Internal Pumps (JP7)
LINE
POWER
LINE
FREQUENCY
JUMPER
COLOR
FUNCTION
JUMPER
BETWEEN
PINS
110VAC
115 VAC
60 HZ WHITE
Connects pump pin 3 to 110 / 115 VAC power line 2 to 7
Connects pump pin 3 to 110 / 115 VAC power line 3 to 8
Connects pump pins 2 & 4 to Neutral 4 to 9
50 HZ
1
BLACK
Connects pump pin 3 to 110 / 115 VAC power line 2 to 7
Connects pump pin 3 to 110 / 115 VAC power line 3 to 8
Connects pump pins 2 & 4 to Neutral 4 to 9
220VAC
240 VAC
60 HZ BROWN
Connects pump pins 3 and 4 together 1 to 6
Connects pump pin 1 to 220 / 240VAC power line 3 to 8
50 HZ
1
BLUE
Connects pump pins 3 and 4 together 1 to 6
Connects pump pin 1 to 220 / 240VAC power line 3 to 8
1
A jumper between pins 5 and 10 may be present on the jumper plug assembly, but has no function on the Model 9110T.
110 VAC /115 VAC
220 VAC /240 VAC
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
May be present on 50 Hz version of
jumper set, but is not functional on
the T200
Figure 13-27: Pump AC Power Jumpers (JP7)