Filter
Top Products
Glitch Triggering. When you set the Acquisition mode on Glitch, a glitch
detection field for each label is added to the screen. These fields allow you
to specify glitch triggering on your timing analyzer. Selecting one of these
fields brings up the following pop-up menu.
Your pop-up may look different depending on the number of channels you
have assigned to the label. Each period indicates that the channel has not
been specified for glitch triggering.
To specify a channel for glitch triggering, place the cursor on one of the
periods and touch the asterisk. The period is replaced with an asterisk,
indicating that the logic analyzer will trigger on a glitch on this channel.
Note If you select < (less than) in the present for field, edge and glitch
triggering are turned off. The Then find Edge or Glitch fields no longer
appear on the screen. The logic analyzer triggers on only the pattern
specified in the Find Pattern fields.
Figure 5-45. Specify Glitch Pop-up for Then Find
HP 16510B Menus
Front-Panel Reference 5-41