Filter
Top Products
To change the base, touch the current base. You will see the following
pop-up menu.
If more than 20 channels are assigned to a label, the Binary option is not
offered in the pop-up. The reason for this is that when a symbol is
specified as a range, there is only enough room for 20 bits to be displayed
on the screen.
When you decide which base you want to work in, choose that option
from the number Base pop-up menu.
If you choose the ASCII option, you can see what ASCII characters the
pattern and ranges defined by your symbols represent. ASCII characters
represented by the decimal numbers 0 to 127 (hex 00 to 7F) are offered on
your logic analyzer. Specifying patterns and ranges for symbols is
discussed in the next section.
Note You cannot specify a pattern or range when the base is ASCII. First
define the pattern or range in one of the other bases, then switch to ASCII
to see the ASCII characters.
Figure 5-15. Base Pop-up
Menus HP 16510B
5-16 Front-Panel Reference