Filter
Top Products
The HP 10269C
General Purpose
Probe Interface
Instead of connecting the probe tips directly to the signal lines, you may
use the HP 10269C General Purpose Probe Interface (optional). This
allows you to connect the probe cables (without the probes) to connectors
on the interface. When the appropriate preprocessor is installed in the
interface, you will have a direct connection between the logic analyzer and
the microprocessor under test.
There are a number of microprocessor specific preprocessors available as
optional accessories which are listed in the Accessories for the
HP 1650/HP1651A and HP 16500A Logic Analyzers data sheet. Chapter
11 of this manual also introduces you to preprocessors and inverse
assemblers.
Figure 2-1. HP 10269C with Preprocessor
Probing HP 16510B
2 - 2 Front-panel Reference