Filter
Top Products
The controls that roll the list in all three menus, the normal State Listing,
the Compare Listing, and the Difference Listing are synchronized. This
means that when you change the current row position in the Difference
Listing, the logic analyzer automatically updates the current row in the
acquired State Listing, Compare Listing and vice-versa. This allows you
to view corresponding areas of the two lists, to cross check the alignment,
and analyze the bits that do not match.
Sincetimetagsarenotrequiredtoperformthecompare,theydonot
appear in either the compare image or difference displays. However,
correlation is possible since the displays are locked together.
Creating a
Compare Image
An initial compare image can be generated by copying acquired data into
the compare image buffer. When you select the "Copy Trace to Compare"
field in the Compare Listing menu a pop-up appears with the options
"Cancel" and "Continue". If the "Continue" is selected, the contents of the
acquisition data structure for the current machine are copied to the
compare image buffer. The previous compare image is lost if it has not
been saved to a disk. If you select "Cancel" the current compare image
remains unchanged.
HP 16510B State Compare Menu
Front-Panel Reference 9-3