Filter
Top Products
4 Pods Each pod can be assigned to one of the analyzers. When the HP 16510B
Logic Analyzer is powered up, Pod 1 is assigned to Analyzer 1 and Pod 5
is assigned to Analyzer 2.
To assign a pod, touch the pod field. With the pop-up that appears, you
can assign the pod to Analyzer 1, Analyzer 2, or Unassign it. Making a
selection closes the pop-up and moves the pod field to the analyzer to
whichthepodisassigned.
5Print ThePrintfieldallowsyoutoprintwhatisdisplayedonthescreenatthe
time you initiate the printout. When you touch the Print field, a pop-up
appears showing you the print options Cancel, Print Screen,andinsome
menus, Print All.
You start a print by touching the Print field. When the pop-up appears,
you touch either Print Screen or Print All. The information on the screen
is frozen, and the Print field changes to Cancel and turns red. While the
data is being transferred to the printer, the logic analyzer’s user-interface
is not usable with the exception of the Cancel field. When the logic
analyzer has completed the data transfer to the printer, the advisory "Print
Completed" is displayed and the user-interface is usable again.
If you wish to stop a printout before it is completed, touch Cancel.This
stops the print, and the message "Print Cancelled" appears in red.
Figure 5-5. Pod Assignment Pop-up Menu
HP 16510B Menus
Front-Panel Reference 5-5