Filter
Top Products
Time Correlating
the Data
In order to time correlate the data, the logic analyzer must store the timing
relationships between states. Since the timing analyzer samples
asynchronously and the state analyzer samples synchronously, the logic
analyzer must use the stored timing relationship of the data to reconstruct
a time correlated display.
To set up the logic analyzer to keep track of these timing relationships,
turn on a counter in the State Trace Specification menu. The following
steps show you how:
1. Display the State Trace Specification menu (Trace 1).
2. Touch the field labeled Count Off.
3. In the pop-up, touch the field labeled Time.
The counter will now be able to keep track of time for the time correlation.
Figure 12-9. Count Time
HP 16510B Using the Timing/State Analyzer
Front-Panel Reference 12-11