Filter
Top Products
Waveform Display Sec/div: 10 ns to 100 s; 0.01% resolution.
Delay: −2500 s to 2500 s; presence of data dependent on the number of
transitions in data between trigger and trigger plus delay (transitional
timing).
Accumulate: Waveform display is not erased between successive
acquisitions.
Overlay Mode: Multiple channels can be displayed on one waveform
display line. Primary use is to view summary of bus activity.
Maximum Number Of Displayed Waveforms: 24
Time Interval
Accuracy
Channel to Channel Skew: 4nstypical.
Time Interval Accuracy: ± (sample period + channel-to-channel skew +
0.01% of time interval reading).
Trigger
Specification
Asynchronous Pattern: Trigger on an asynchronous pattern less than or
greater than specified duration. Pattern is the logical AND of specified
low, high, or don’t care for each assigned channel. If pattern is valid but
duration is invalid, there is a 20 ns reset time before looking for patterns
again.
Greater Than Duration: Minimumdurationis30nsto10mswith10ns
or 0.01% resolution, whichever is greater. Accuracy is + 0 ns to −20 ns.
Trigger occurs at pattern + duration.
Less Than Duration: Maximumdurationis40nsto10mswith10nsor
0.01% resolution, whichever is greater. Pattern must be valid for at least
20 ns. Accuracy is + 20 ns to −0 ns. Trigger occurs at the end of the
pattern.
Glitch/Edge Triggering: Trigger on glitch or edge following valid
duration of asynchronous pattern while the pattern is still present. Edge
can be specified as rising, falling or either. Less than duration forces glitch
and edge triggering off.
Specifications and Operating Characteristics HP 16510B
C-6 Front-Panel Reference