Filter
Top Products
Loading
Inverse
Assembler Files
You load the inverse assembler file by loading the appropriate
configuration file. Loading the configuration file automatically loads the
inverse assembler file.
Selecting the
Correct File
Most inverse assembler disks contain more than one file. Each disk
usually contains an inverse assembler file for use with the HP 10269C and
preprocessor as well as a file for general purpose probing. Each inverse
assembler filename has a suffix which indicates whether it is for the HP
10269C and preprocessor or general purpose probing. For example,
filename C68000_I indicates a 68000 inverse assembler file for use with
the HP 10269C and the 68000 preprocessor. Filename C68000_P is for
general purpose probing. Specific file descriptions and recommended
usage is contained in each preprocessor operating note.
Loading the
Desired File
To load the inverse assembler file you want, insert the 3.5-inch disk you
received with your preprocessor in the disk drive. Select System in the
upper left field. Touch Front Disk or Rear Disk, depending which drive
the disk is in, in the field second from the left at the top of the display. The
logic analyzer will read the disk and display the disk directory.
Configure the second row of fields as follows:
Touch Execute to load the selected file.
Load State/Timing E
from file
filename
Microprocessor Specific Measurements HP 16510B
14 - 18 Front-panel Reference