Filter
Top Products
The State
Listing
The state listing displays three columns of numbers as shown:
The first column of numbers are the state line number locations as they
relate to the trigger point. The trigger state is on the line 0 in the vertical
center of the list area. The negative numbers indicate states occurring
before the trigger and the positive numbers indicate the states occurring
after the trigger.
The second column of numbers are the states (listed in HEX) the state
analyzer sees on the address bus. This column is labeled ADDR.
The third column of numbers are the states (listed in HEX) the state
analyzer sees on the data bus. This column is labeled DATA.
State Locations
Figure 8-22. State Listing showing State Locations
HP 16510B Using the State Analyzer
Front-Panel Reference 8 - 19