Filter
Top Products
Selecting
Samples per
Division
You can specify the samples per division by entering the number of states
per division either with a keypad or the knob. The range is from 1 to 104
per division.
Delay from
Trigger
You can specify the delay from trigger by specifying the number of states
from the trigger. The minimum is −1023 and the maximum is 1024
independent of trace position in the record. Delay is not limited to the
window containing data.
State
Waveform
Display
Features
The waveform display features of the State Waveform menu are the same
as the Timing Waveform menu with regard to:
• low levels (below threshold) are represented by darker line
• red, green, and yellow dotted lines representing the trigger point, X
marker, and O marker respectively.
• Accumulate Mode
• graticule frame with 10 horizontal divisions
XandO
Markers for
State Waveform
Markers can be placed on the waveform display by specifying the number
of states from trigger in the case of the X marker or number of states from
either the trigger or X marker in the case of the O marker.
Markers can be automatically placed on the waveform by searching for
specific patterns assigned to each marker.
The X and O marker operation is identical to the marker operation in the
Timing Waveform Menu (see chapter 6).
State Waveform Menu HP 16510B
10-6 Front-Panel Reference