Filter
Top Products
State/State
Mixed Mode
Display
When two state analyzers are on, the logic analyzer can display both state
listings as shown in figure 6-16. The acquired data of both machines is
interlaced.
The State/State mixed mode can be set up in either Listing 1 or Listing 2.
For example, the mixed display in figure 6-16 is in Listing 1. The data
acquired by machine 1 is displayed with the state location numbers
centered in the far left column. The data acquired by machine 2 is
displayed with the state location numbers offset to the right of this column.
To time correlate data from two state machines, the Count (State Trace
Menu) for both machines must be set to Time.
The markers for a State/State time-correlated Mixed Mode will be the
same as the markers placed in each of the individual State Listings.
Figure 6-16. State/State Mixed Mode Display
HP 16510B Interpreting the Display
Front-Panel Reference 6 - 17