Filter
Top Products
This also occurs for DATA, as shown:
If you want to see the waveforms of each bit, you would leave the display
as it is. However, this makes the waveform display very crowded. An easy
solution is overlapping the waveforms.
Overlapping
Timing
Waveforms
A convenient method of displaying the waveforms of all the bits in ADDR
and DATA is to overlap them. To overlap the bits for ADDR and those for
DATA, follow these steps.
1. Delete all the ADDR and DATA bit labels that were put in the label
field in the last section.
Figure 12-16. Individual Data Labels
HP 16510B Using the Timing/State Analyzer
Front-Panel Reference 12-15