Key Features Two 3.5-inch disk drives are integral to the instrument for storing logic
analyzer configurations and acquired data. The disk drive also provides a
way of loading inverse assembly configuration files into the logic analyzer
for configuring ease.
Additional key features of both models include:
• Transitional timing for extended timing analyzer memory
• Lightweight passive probes for easy hook-up
• All channels can be used for state or timing at the maximum sample
rate
• HP-IB and RS-232C interface for programming and printer dumps
• An external trigger BNC connector
• Efficient package size
• Transitional or glitch timing modes
• 1k-deepmemoryonallchannels
• Glitch detection
• Marker measurements
• Triggering and pattern qualification
• Overlapping of timing waveforms
• Eight sequence levels
• Eight pattern recognizers
• One range recognizer
• Time and number-of-states tagging
• Pre-store
• Auto-scale
• Programmability
• Cross-domain triggering
• Interactive measurements
• Mixed-mode display
• Oscilloscope type controls in the timing analyzer
• State Compare, Chart, and Waveform displays
Accessories
Supplied
Table 1 lists the accessories supplied with your HP16510B. If any of these
accessories were missing when you received the logic analyzer from the
factory, contact your nearest Hewlett-Packard office. If you need
additional accessories, refer to the Accessories for the HP 1650A/HP
1651A and HP 16500A Logic Analyzers data sheet.
HP 16510B General Information
Front-panel Reference 1 - 3