Filter
Top Products
To access one of the Label fields, touch the desired field. You will see a
pop-up menu like that shown below.
Turn Label On. Selecting this option turns the label on and gives it a
default letter name. If you turned all the labels on they would be named
POD 1 through T from top to bottom in the timing analyzer and A
through T in the state analyzer. When a label is turned on, bit assignment
fields for the label appear to the right of the label under the pods.
Modify Label. If you want to change the name of a label, or want to turn
a label on and give it a specific name, you would select the Modify Label
option. When you do, an alphanumeric keypad pop-up menu appears. You
use the pop-up keypad to name the label. A label name can be a maximum
of six characters.
Turn Label Off. Selecting this option turns the label off. When a label is
turned off, the bit assignments are saved by the logic analyzer. This gives
you the option of turning the label back on and still having the bit
assignments if you need them. The timing waveforms and state listings are
also saved.
Youcangivethesamenametoalabelinthestateanalyzerasinthe
timing analyzer without causing an error. The logic analyzer distinguishes
between them. An example of this appears in chapter 7 of the HP 16510B
Getting Started Guide and chapter 9 of this manual.
Figure 5-8. Label Pop-up Menu
Menus HP 16510B
5-10 Front-Panel Reference